Use as
is to make shaft larger Fully machineable to change size or configuration Eliminates need
for complete shaft replacement. No welding required. Clamp-
type coupling end won't mar shaft. Shaft Adapters are designed to modify, extend or repair an ex
isting shaft and provide a fully machineable male output shaft ...
- Material: Stainless Steel
- Bore Size (in.): 1/2
- Screw Size: 8-32 x 1/2
Weight: 5120517
Use as
is to make shaft larger Fully machineable to change size or configuration Eliminates need
for complete shaft replacement. No welding required. Clamp-
type coupling end won't mar shaft. Shaft Adapters are designed to modify, extend or repair an ex
isting shaft and provide a fully machineable male output shaft ...
- Material: Stainless Steel
- Bore Size (in.): 5/8
- Screw Size: 10-32 x 1/2
Weight: 5120517
Use as
is to make shaft larger Fully machineable to change size or configuration Eliminates need
for complete shaft replacement. No welding required. Clamp-
type coupling end won't mar shaft. Shaft Adapters are designed to modify, extend or repair an ex
isting shaft and provide a fully machineable male output shaft ...
- Material: Stainless Steel
- Bore Size (in.): 3/4
- Screw Size: 1/4-28 x 3/4
Weight: 5120517
Use as
is to make shaft larger Fully machineable to change size or configuration Eliminates need
for complete shaft replacement. No welding required. Clamp-
type coupling end won't mar shaft. Shaft Adapters are designed to modify, extend or repair an ex
isting shaft and provide a fully machineable male output shaft ...
- Material: Stainless Steel
- Bore Size (in.): 7/8
- Screw Size: 1/4-28 x 3/4
Weight: 5120517
Use as
is to make shaft larger Fully machineable to change size or configuration Eliminates need
for complete shaft replacement. No welding required. Clamp-
type coupling end won't mar shaft. Shaft Adapters are designed to modify, extend or repair an ex
isting shaft and provide a fully machineable male output shaft ...
- Material: Stainless Steel
- Bore Size (in.): 1
- Screw Size: 1/4-28 x 3/4
Weight: 5120517
Use as
is to make shaft larger Fully machineable to change size or configuration Eliminates need
for complete shaft replacement. No welding required. Clamp-
type coupling end won't mar shaft. Shaft Adapters are designed to modify, extend or repair an ex
isting shaft and provide a fully machineable male output shaft ...
- Material: Stainless Steel
- Bore Size (in.): 1-1/8
- Screw Size: 1/4-28 x 3/4
Weight: 5120517
Use as
is to make shaft larger Fully machineable to change size or configuration Eliminates need
for complete shaft replacement. No welding required. Clamp-
type coupling end won't mar shaft. Shaft Adapters are designed to modify, extend or repair an ex
isting shaft and provide a fully machineable male output shaft ...
- Material: Stainless Steel
- Bore Size (in.): 1-1/4
- Screw Size: 1/4-28 x 3/4
Weight: 5120517
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.313
- Material: Stainless Steel
- Bore Size (in.): 1/4
- Screw Size: 6-32 x 3/8
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.313
- Material: Stainless Steel
- Bore Size (in.): 5/16
- Screw Size: 6-32 x 3/8
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.406
- Material: Stainless Steel
- Bore Size (in.): 3/8
- Screw Size: 10-32 x 1/2
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.406
- Material: Stainless Steel
- Bore Size (in.): 7/16
- Screw Size: 10-32 x 1/2
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.500
- Material: Stainless Steel
- Bore Size (in.): 1/2
- Screw Size: 1/4-28 x 5/8
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.500
- Material: Stainless Steel
- Bore Size (in.): 9/16
- Screw Size: 1/4-28 x 5/8
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.500
- Material: Stainless Steel
- Bore Size (in.): 5/8
- Screw Size: 1/4-28 x 5/8
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.500
- Material: Stainless Steel
- Bore Size (in.): 3/4
- Screw Size: 1/4-28 x 5/8
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.500
- Material: Stainless Steel
- Bore Size (in.): 7/8
- Screw Size: 1/4-28 x 5/8
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.500
- Material: Stainless Steel
- Bore Size (in.): 1
- Screw Size: 1/4-28 x 3/4
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.625
- Material: Stainless Steel
- Bore Size (in.): 1-1/8
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.625
- Material: Stainless Steel
- Bore Size (in.): 1-1/4
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 5120516
Used on square shafts Can be placed anywhere on shaft Smooth bore protects shafts from damage Superior holding power over set-screw
type collars Exclusively stocked by Staf
ford, these collars fit on standard square shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts
for other components. ...
- Total Width (in.): 0.625
- Material: Stainless Steel
- Bore Size (in.): 1-3/8
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 5120516